Sepura SC21 Series User Manual

Talkgroup Selection Mode
When the radio is customised for Talkgroup Selection Mode, the selected talkgroup becomes the
requested talkgroup to which you make calls.
You can insert frequently used talkgroups in the Favourites folder, making it quicker and easier to
change your talkgroup. Additionally your radio may be customised for Quick Groups that allow you
to change to a frequently used talkgroup using a soft key.
You can create your own user defined scan lists that are saved into the UDSL special folder. The
UDSL folder ‘greys out’ (disables) talkgroups that are invalid for the current network. The scan list
allows you to set scanning priorities on the talkgroups, so the radio can prioritise calls between the
scanned talkgroups. See User Defined Scan Lists on page42.
38 SC21 Series hand-portable radio

Sepura SC21 Series Specifications

General

IP Rating	IP54
Operating Temperature	-20°C to +55°C
Channel Spacing	25 kHz
Ingress Protection	IP54
Channels	Up to 2000
Frequency Bands	380-430 MHz, 806-870 MHz
Battery Life	Up to 14 hours
RF Power Output	1W
TETRA Air Interface	ETSI EN 300 392-2