Sepura SC21 Series User Manual

To return to the top level menu screen, either wait for the inactivity timer to expire, or press and hold
the Cancel/Home key, or press and hold the ‘clear’ soft key.
To send the message immediately
See Sending messages below.
You can set an option to confirm that the message has been delivered, see SDS report request on
page74.
To save the message
Select Options > Save.
To edit a saved text message
1. View Saved Messages and select the saved message.
2. Select Options > Edit.
3. Edit the message as required. (See Text entry on page66.)
4. EITHER:
send the message immediately
save the updated message
To send the message immediately
See Sending messages below.
To save the updated message
Select Options > Save.
Sending messages
You can send text (SDS) and status messages to:
the currently selected talkgroup
the default destination customised in your radio (for example, the message sender)
a Phonebook entry
a destination you key in
For setting default destination see Set default destination on page 70.
1. Choose one of the following methods:
Select a saved text message
Select a status message from the Send Status List
Create a text message
72 SC21 Series hand-portable radio

Sepura SC21 Series Specifications

General

IP Rating	IP54
Operating Temperature	-20°C to +55°C
Channel Spacing	25 kHz
Ingress Protection	IP54
Channels	Up to 2000
Frequency Bands	380-430 MHz, 806-870 MHz
Battery Life	Up to 14 hours
RF Power Output	1W
TETRA Air Interface	ETSI EN 300 392-2