Contents
4
6.2 Quick Start 25
6.2.1 Language Selection 25
6.3 Menu Structure 26
6.3.1 Main menu 26
6.3.2 Function menu items 26
6.3.3 Settings menu items 26
6.3.4 Output menu 27
6.3.5 Setup menu 28
6.3.6 Operating mask 32
6.3.7 Change product 33
6.3.8 Auto-Set 34
6.3.9 Product parameter 35
6.3.10 Conveying speed 35
6.3.11 Output 36
6.3.11.1 Output adjust 36
6.3.11.2 Output lock 37
6.3.11.3 Monitoring 37
6.3.11.4 Output Level 37
6.3.11.5 Output options 38
6.3.12 Setup 38
6.3.12.1 Logbook 39
6.3.12.2 Clear logbook (Menu item requires login) 41
6.3.12.3 Show counter 41
6.3.12.4 Device-Info 42
6.3.12.5 Revision 42
6.3.12.6 Change password (menu item requires login) 43
6.3.12.7 Language 43
6.3.12.8 Clock/Date (menu item requires login) 43
6.3.12.9 Setup options (menu item requires login) 44
6.3.12.10 Units (menu item requires login) 44
6.3.12.11 Frequency deviation (menu item requires login) 44
6.3.12.12 Factory settings (menu item requires login) 45
6.3.12.13 Login 45
6.3.12.14 Logout 45
6.3.12.15 Air pressure monitoring (option) (menu item requires login) 45
6.3.12.16 Flap monitoring (option) (menu item requires login) 46
6.3.12.17 External error (option) (menu item requires login) 46
6.3.12.18 Ejection monitoring (option) (menu item requires login) 46
7 Errors and error remedying 47
7.1 Error messages 47
7.1.1 Receiver voltage too high 47
7.1.2 Receiver faulty 47
7.1.3 Transmitter faulty 47
7.1.4 Transmitter over temperature 47
7.1.5 Hardware CU 48
7.1.6 Hardware IO 48
7.1.7 Communication IO 48
7.1.8 Watchdog 48
7.1.9 Memory error 48
7.1.10 Short circuit MV 48
7.1.11 Connection MV 48
7.1.12 Air pressure 49
7.1.13 Diverter position 49
7.1.14 Sensor 1 faulty 49
7.1.15 Sensor 2 faulty 49
7.1.16 Filling level 49
7.1.17 External error 50
7.2 Undefinable activation of the switching outputs 50
7.3 Replacing the backup battery 51
To Next Page
Loading...