Contents
3
Contents
1 General information 6
1.1 Introduction 6
1.2 Field of application 6
1.3 Application reasons 6
1.4 System identification 6
1.5 Symbols used 6
1.6 EC DECLARATION OF CONFORMITY 6
1.7 Overview 7
2 Design and method of operation 8
2.1 Functional principle 8
2.2 Functional and control elements 9
2.2.1 Operating module with LCD graphic display 9
2.2.2 Cable glands 9
2.2.3 PRIMUS+ / IO electronics board 10
2.2.4 PRIMUS+ / CU electronics board 12
3 Dimensions and technical data 13
3.1 Technical data sheet, see annex 13
3.2 Supply connections, see technical data sheet in the annex 13
3.3 Environmental conditions for operation, storage, and transport 13
3.4 Noise levels 13
4 Safety 14
4.1 Intended use 14
4.2 Safety signs 14
4.3 Dangers arising from non-compliance with safety notes 14
4.4 Safety information for operators 14
4.5 Safety information for operation, maintenance and cleaning 15
4.6 Safety information for commissioning 15
4.7 Safety information for storage and transport 15
4.8 Notes on residual risks 15
4.9 Notes on stable standing requirements 15
4.10 Consequences of unauthorised modification 15
4.11 Improper use 16
5 Commissioning 17
5.1 Mechanical mounting 17
5.2 Connection of the equipment 17
5.2.1 PRIMUS+ / IO electronics board (control electronics board) 18
5.2.2 Electrical connections 18
5.2.3 PRIMUS+ / CU electronics board (evaluation electronics board) 19
5.2.4 Electrical performance 20
5.2.5 Drawing of input / output connections 20
5.2.6 Electrical connection of the equipment 21
5.2.6.1 Mains supply via safety socket 21
5.2.6.2 Mains supply via terminal box 21
5.2.7 Behaviour of machine at start up 22
5.2.8 Relays – operating status 23
6 Menu / Operation PRIMUS+ 24
6.1 General Operation 24
To Next Page
Loading...