SESOTEC PRIMUS+ - Page 40

6. Menu / Operation PRIMUS+
40
The following messages and information are displayed in the logbook:
Type
Incident
Additional Information
Comment
Metal
Metal
- Global metal counter
- Metal signal
Info
Mains on/off
Product change
- Old Product number
- New Product number
Change of product data
- Current Pd. number
- Product data group
For learning, product angle and
sensitivity are also displayed
Charge change
- Charge number
Outputs on/off
Metal incident
- Metal signal
Active during test
Time /date settings
Change of system data
- System data group
EEPROM Grundinit
Bypass active
RESET error
Login
ID
Logout
Transmitter temperature
Receiver too high
EEPROM
Error
Receiver too high
- Error counter (global)
Transmitter over-
temperature
- Error counter (global)
Flap position
- Error counter (global)
Air pressure
- Error counter (global)
Reject container full
- Error counter (global)
Reject control
- Error counter (global)
Light barrier
- Error counter (global)
EEPROM
- Error counter (global)
External error
- Error counter (global)