Super II • User Functions 15
User Functions
Basic Weighing
To weigh an object on your scale, use the following procedure:
1. Press the ZERO key and wait for the display to show Ø.ØØ weight with the “OK” stability indicator on.
2. Place the object(s) to be weighed on the pan.
3. Wait for the “OK” symbol, then read the weight from the display.
Weighing/Counting with a Container
To weigh or count objects WITHOUT including the weight of the container, use the tare or ZERO keys. If
you wish to retain the container weight for later reference or to print or display the gross weight, the tare
key should be used. The tare weight of the container(s) will be displayed on the top line of the display until
the ZERO or reset key is pressed. If you do not need to retain the container weight, the ZERO key should
be used to eliminate the weight of the container(s).
If the tare weight of the container is known, a full container may be placed on the pan and the tare weight
entered through the numeric keypad.
To tare or zero out the weight of the container, and then weigh or count the contents, use the
following procedure:
1. Press the ZERO key. Place the container on the pan.
2. Press the tare or ZERO key. (If the container is not empty and tare weight is known, enter the value using the numeric keypad and
then press the tare key).
3. Perform your weighing or counting application.