Super II • User Functions 17
PART ID APW COUNT MORE EXIT
Enter ID, Tare, APW, or Count.
1 2 3 4
tare
enu
remote
abc reset
Entering Numeric Values for ID, APW, COUNT, or tare
The numeric keypad can be used for entering values for the PART ID, the APW (average piece weight), the
COUNT, or tare weight. Additional ID registers are available by pressing the MORE soft key. To enter
known values into those registers, follow the procedure below:
1. Press any of the numeric keys. The 5 soft keys change to the following:
2. When you are finished entering the number, press the desired soft key below the display or press the tare hard key to enter
that value into the scale register.
NOTE: Numeric entry uses the scale’s “medium” size font and is limited to 16 characters.
To Next Page
Loading...
Need help?
General
