24 User Functions • Super II
Soft Key:
SAVE
Saving Information to the Database or Transaction Log
Your scale comes equipped with a database for storage of APW’s (average piece weights), Tare Weights,
Counts, Set Points or complete Transactions with various ID fields and a Time/Date stamp. In order to set
up your database for the fields you want to use, please refer to the DATBASE SETUP soft key in the “Super-
visor and Technical Setups” manual.
The database is sorted based on the IDØ/Part ID field which must be associated with any record going into
the database. To view the information in the database, please refer to the DATBASE soft key section in the
following pages.
Once your scale has gathered all of the information you want to store in the database, you may save that
record by following the steps below:
1. Press the menu hard key on the controller. The soft keys will change to:
2. Press the SAVE soft key.
3. a. Saving to the Database
If the PART ID already has a record associated with it in the database, the following screen will appear:
The PART ID can be overwritten or changed by entering the desired letter (abc key) or number followed by the ACCEPT
soft key.
If the PART ID is correct, press ACCEPT to move on to the field saving screen in section b if using a database format that
keeps track of the count.
Select Menu Option:
1234
SAVE ACCUM DISPLAY DATBASE MORE
Base 1
Pieces
OK!
abc reset
menu remote
tare
ACCEPT EXIT
PART ID: ABC-123
CAUTION: This ID already has a record.
Hit ACCEPT to overwrite or enter new ID.