26 User Functions • Super II
Select Menu Option:
1234
SAVE ACCUM DISPLAY DATBASE MORE
Base 1
Pieces
OK!
abc reset
menu remote
tare
Soft Key:
ACCUM
Accumulating Results by Weight or Count
Various displayed weights or counts can be accumulated by using the ACCUM soft key in the User’s Menu.
The CLEAR and COUNT keys in the Default User Menu can be used to toggle between the weight and the
count.
To accumulate results, follow the procedure below:
1. Once the desired weight or count is displayed, press the menu hard key on the controller.
The soft keys will then change to:
2. Press the ACCUM soft key and the scale will then load the Weight or Count into the “ACCUM WT:” or “ACCUM CT:” register
and display it on the top line.
3. To continue accumulating the weights for the same part from the same batch, simply put on your new load and press the
menu hard key and the ACCUM soft key again as described in steps 1 and 2 above.
4. To clear out or reset the accumulator register, press the RESET hard key on the controller.
NOTE: Counts for different pieces can be individually accumulated in the Database by simply saving each
batch. See the SAVE soft key in the previous pages and the DATBASE FORMAT soft key in the
Supervisor Menu of the “Supervisor and Technical Setups” manual to choose the database selec-
tion for storing counts.