22 User Functions • Super II
To enter a value into one of the above registers , use the function key F1 - F3 that corresponds to the
desired soft key (ex: F2 for entering an APW value). Use the F9 key to enter a tare value. Use the F5 Key to
EXIT.
Entering Alphanumeric ID Information
Once a letter is pressed, the scale’s display changes to the ID entry mode. At this point, there are two ways
of entering the information into the ID register. The function keys F1 - F4 are available to select registers
and move throughout the menu. Another method is to press the ALT key followed by a number between 0
and 9, depending upon the register to be accessed.
Alphanumeric ID entry Alphanumeric ID entry
using ALT key: using function key:
ALT + 1 = OPRTR F1= PART ID
ALT + 2 = ORDER # F2= LOT #
ALT + 3 = LOT # F3= DESC
ALT + 4 = DESC F4= MORE
ALT + 5 = VENDOR
ALT + 6 = REV #
ALT + 7 = ID7 F1= OPRTR
ALT + 8 = ID8 F2= ORDER #
ALT + 9 = ID9 F3= VENDOR
ALT + 0 = PART ID F4= MORE
F1= REV#
F2= ID7
F3= ID8
F4= ID9
F5= EXIT
PART ID LOT # DESC MORE EXIT
Enter ID Field Value:
ABC
F1 F2 F3 F4 F5
abc reset
menu remote
tare
F8
F9
F10 F12
F11