Sewhacnm SI 4100 - Contents

Digital Weighing Indicator
SI 4100
- 2 -
CONTENTS
1. Before Installation
---------------
3 page
2. Introduction
---------------
4 page
3. Specification
----------------
5 page
4. Installation
4-1. External Dimension & Cutting Size
4-2. Load Cell Installation
4-3. Installation Components
---------------
---------------
---------------
---------------
11page
11 page
12 page
12 page
5. Set-up
5-1. Calibration
5-2. TEST Weight Calibration Mode
5-3. Simulation Calibration Mode(Without Test Weight)
5-4. Set-up
5-5. F-Function
---------------
---------------
---------------
---------------
---------------
---------------
14 page
14 page
14 page
17 page
20 page
21 page
6. Interface
6-1. Serial Interface (RS-232C)
6-2. Current Loop Interface
6-3. Print Interface (Centronics Parallel Interface)
6-4. Analog Output Interface (0~10V)
6-5. Analog Output Interface (4~20mA)
6-6. Serial Interface (RS-232C / 422 / 485)
6-7. BCD INPUT
6-8. BCD OOUTPUT
6-9. Command Mode
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
---------------
42 page
42page
45page
46page
47page
49page
50page
51page
52page
53page
7. Error & Treatment
7-1. Load Cell Installation
7-2. Calibration Process
7-3. Indicator Error & Treatment
7-4. Indicator Test Mode
---------------
---------------
---------------
---------------
---------------
56page
56page
56page
57page
58page
Warrantee Certification
---------------
59page