Sewhacnm SI 4100 - Specifications of SI 4100; Analog Input and A;D Conversion; Digital Part Specifications; General Specifications

Digital Weighing Indicator
SI 4100
- 5 -
3. SPECIFICATION
3-1. Analog Input & A/D Conversion
Input Sensitivity
0.3㎶ / Digit
Load Cell Excitation
DC 10V ( - 5V ~ + 5V )
Max Input Signal
Max3.2mV/V
Temperature Coefficient
[Zero] ±16PPM/℃
[Span] ±3.5PPM/℃
Input Noise
±0.3㎶ P.P
Input Impedance
Over 10㏁
A/D Conversion Method
Sigma-Delta
A/D Resolution(Internal)
520,000 Count(19bit)
A/D Sampling Rate
Max 500times / Sec
Non-Linearity
0.005% FS
Display Resolution(External)
1/20,000
3-2. Digital Part
Display
Parts
Specification
Display
Main Display
7Segments, 7digits VFD green Color
Size :12.7(H) ×7.0(W)mm
Min. Division
×1, ×2, ×5, ×10, ×20, ×50
Max display value
+999,950
Under Zero value
"-" (Minus display)
Status lamp
Steady, Zero, Tare,
Run, Hold, Print, Comm.
" ▼" Condition display Lamp
SP1, SP2, SP3, SP4 , kg, g, t
Green LED Display(3Ø )
K e y
Number, Function,
CAL. Lock Key
Number Key(10), Function(5),
CAL. Lock keys (1pcs)
3-3. General Specification
Power Supply
AC110/220V±10%), 50/60Hz, about 30VA
Operating Temperature Range
-10℃ ~ 40℃
Operating Humidity Range
Under 85% Rh (non-condensing)
External Dimension
200mm(W)ｘ105mm(H)ｘ165mm(L)
Net Weight(kg)
About 2.3kg
Gross Weight(kg)
About 3.0kg
※ AC 110V, Power supply is an optional before ex-factory.