Sewhacnm SI 4100 - Command Mode Operations; Read Commands in Command Mode

Digital Weighing Indicator
SI 4100
- 54 -
6-9. Command Mode
Under “Command Mode”, Indicator will recognize the receipt of Order based on 02h(Header) and 03h(END)
signal, and transfers ACK(06)/ NAK(15).
6-9-1. Read Command (Standard Serial Port and Optional Port is same.)
P.C ->> SI 4100
Command
SI 4100 Response
STX ID NO. RCWT ETX
Current Weight
Current Weight Transfer
-STX ID NO. RCWT ST,NT+/-Current Weight(7/8byte) Weight
unit(2byte)ETX
STX ID NO. RCWD
ETX
Indicator Memory
Indicator Memory data Transfer
-STX ID NO. RCWD DATE(6byte) TIME(6byte) P/N(2byte)
S/N(6byte) TARE(7/8byte) current weight(7/8byte) weight
unit(2byte) ETX
STX ID NO. RSUB ETX
SUB-Total Data
SUB-Total Data Transfer
-STX ID NO. RSUB P/N(2byte) Accumulated Count(6byte)
Accumulated Weight(11byte) Weight unit(2byte) ETX
STX ID NO. RGRD ETX
GRAND Total Data
GRAND Total Data Transfer
-STX ID NO. RGRD P/N(2byte) Accumulated Count(6byte)
Accumulated Weight(11byte) Weight unit(2byte) ETX
STX ID NO. RSNO ETX
S/N Data
(Accumulated data)
S/N Data Transfer(For Current P/N)
-STX ID NO. RSNO Accumulated Count(6byte) ETX
STX ID NO. RFIN ETX
Finished Weight
Finished Weight Data Transfer
-STX ID NO. RFIN Finished Weight(7/8byte) ETX
STX ID NO. RTIM ETX
Current Time Data
Current Time Data Transfer
-STX ID NO. RTIM Current Time(6byte) ETX
STX ID NO. RDAT ETX
Current Date Data
Current Date Data Transfer
-STX ID NO. RDAT Current Date(6byte) ETX
STX ID NO. RTAR ETX
TARE Data
TARE Data Transfer
-STX ID NO.
RTAR TARE Data(7/8byte) ETX
STX ID NO. RSP1 ETX
SP1 Set value
SP1 Set value Data Transfer
-STX IN NO. RSP1 Set value(7/8byte) ETX
STX ID NO. RSP2 ETX
SP2 Set value
SP2 Set value Data Transfer
-STX IN NO. RSP2 Set value(7/8byte) ETX
STX ID NO. RSP3 ETX
SP3 Set value
SP3 Set value Data Transfer
-STX IN NO. RSP3 Set value(7/8byte) ETX