2. INTRODUCTION
2-1. Introduction
Thank you for your choice of this “SI 4100” Industrial Digital Weighing Controller.
This “SI 4100” model is advanced model of “SI 4100”, with powerful communication performance.
With 2ports serial port communication and precise weighing control system, you can upgrade your
weighing process.
This “SI 4100” Weighing Controller has various kinds of “Weighing Mode”, like Limit, Packer, and
Check weighing Mode, so you can apply various kinds of weighing applications.
Please review this instruction Manual and learn more about information about “SI 4100”.
Enjoy your process efficiency with “SI 4100” Weighing Controller.
2-2. Cautions
1) Don’t drop on the ground or avoid serious external damage on item.
2) Don’t install under sunshine or heavy vibrated condition.
3) Don’t install place where high voltage or heavy electric noise condition.
4) When you connect with other devices, please turn off the power of item.
5) Avoid from water damage.
6) For the improvement of function or performance, we can change item specification without prior notice
or permission.
7) Item’s performance will be up-dated continuously base on previous version’s performance.
2-3. Features
1) All Modules and Option Cards are isolated to maximize accuracy and performance.
2) External input terminal inside.(4pcs:Can be set by F11 mode)
3) By using “Photo-Coupler” on each module(Option, Analog board, In/Out), we improved “Impedance
problem”, “Isolation ability among inputs”, “Leading power problem”, and “Noise covering
function”.
4) Data back-up function, when the sudden power off
5) Set value Error check function added – If each set value is not correct for selected “weighing mode”,
“E” will be displayed and will not operate until correct set value input.
6) Polycarbonate film panel, strong against dust and water
7) 2port Serial Interface - RS-232C (Com. Port1) is standard installed.
8) Weight Unit selection Function added. (“g”, “kg”, “t” selectable – F40)
9) Variable options(Order in advance, Refer Chapter 5. Interface)
To Next Page
Loading...