What to do if my Sharp AJ-6000 says 'Unable to Copy, Out of xxxxx Ink'?
If your Sharp Copier displays 'Unable to Copy, Out of xxxxx Ink', it means the indicated ink tank is empty. Replace the empty ink tank with a new one. The ink color that needs replacing is indicated on the display.
What to do if my Sharp AJ-6000 displays 'Pull out power plug. Remove paper jam.'?
When your Sharp Copier shows the message 'Pull out power plug. Remove paper jam.', unplug the power cord from the outlet. Then, remove all the jammed paper. After that, plug the power cord back in.
Steps to connect the unit to a power source and information on auto shut-off.
Detailed procedure for installing the print heads and ink tanks.
Process for adjusting print heads to ensure optimal print quality.
Step-by-step instructions for loading paper into the main paper tray.
Instructions for loading single sheets of paper using the bypass tray.
Step-by-step guide to perform a standard copy operation.
Restores all unit settings to their original factory default values.
Step-by-step guide to replace an empty or low ink tank.
Procedure to clean the print head for better copy quality.
Instructions for replacing a damaged or faulty print head.
Lists common error messages and their solutions with page references.
Guides to diagnose and resolve problems with unit operation and paper handling.
Guides to diagnose and resolve issues with copying performance and paper jams.
To Next Page
General
