Sharp AJ-6020 - Basic Functions and Display Panel

45
HOW TO PRINT
1
Make sure that the paper of the desired size and type is loaded
in the tray.
2
Open the document you intend to print, and select "Print" from
the application's "File" menu.
3
Verify the "Printer Name" is set to "SHARP AJ-6020" and click
the "Properties" button.
4
Specify the print settings including the number of copies,
media type, and print quality, and then click the "OK" button to
start printing.
For more information on print settings, refer to the Online Manual.
BONUS SOFTWARE
PhotoSuite III SE
If you want to install this application onto your computer, set the supplied CD-ROM in your
CD-ROM drive, and then follow the steps shown below.
1
Click the "Start" button, and select "Run".
2
Type "D:\MGI\PS3\SETUP.EXE", and then click the "OK" button.
(Change "D" to correspond to the letter of your CD-ROM drive.)
Follow the on-screen instructions to install PhotoSuite III SE.
To use PhotoSuite III SE, Internet Explorer 4.0 or a later version should be already
installed in your computer. Internet Explorer is automatically installed when
installing Sharpdesk. (See page 37)