Sharp AJ-6020 - How to Change Settings from the Operation Panel; Adjusting Paper Size Setting

46
OPERATION PANEL
Check the names and function of the parts on the operation panel.
PART NAMES AND FUNCTIONS
Refer to the illustration of the operation panel on your unit.
POWER button ()
Use to turn the unit on/off. (See page 12)
Paper clip tray
Keep paper clips here.
COPY QUALITY button/
COPY QUALITY indicators (, )
Use this button to select the required copy
quality. (See page 55)
ERROR indicator ()
Lights up when an error occurs. (See page 78)
SCAN button ()
Use to switch the unit to the scanner mode.
(See page 69)
Display panel
Displays the status of the unit, setting
values and the selected number of copies.
(See the next page)
COLOUR MODE button/
COLOUR MODE indicators (, )
Use this button to select colour or black/
white. (will not be lit while in the scanner
mode.) (See page 55)
CLEAR/STOP button ()
Press this button to return the number of
copies to "0" or to cancel copying. Press the
button twice to return the copy settings to
the user defaults. (See page 68)
PAPER SELECT button ()
Use to select the paper size and paper type.
(See page 53, 54)
BRIGHTNESS/INTENSITY button
()
Use to set the brightness and intensity. (See
page 59)
ZOOM button ()
Use to adjust the reduction/enlargement
copy ratio setting. (See page 56)
MENU button ()
Use to change the user program settings or
select maintenance programs.
ARROW button
, button Use the ( ) button to scroll
forward through the copier
setting selection and the
( ) button to scroll back.
, button Use the ( ) button to scroll
forward through the setting
values and the ( ) button
to scroll back.
ENTER button ()
Use this button to enter the selected value
for each setting.
COPY QUANTITY button (, )
Set the number of copies using increase () /
decrease
() buttons. (See page 55)
START button ()
Press to start copying. (See page 49) This
button is also used to reactivate the unit
from the sleep mode. (See page 65)