70
USING THE PRINTER MODE
The unit can be used as a printer after installing the printer driver onto your computer. Refer
to "Print" in the Online Manual for information on using the unit as a printer. Load paper into
the unit for printing in the same way as for copying.
RESERVING COPY AND SCAN JOBS
Reserving a copy job
While the unit is printing, make copy settings, and press the "START" button ( ) to
reserve the job. After printing is completed, copying will start. The messages will change as
below.
Reserving a scan job
While the unit is printing, make the scan setting using the "SCAN" button, and press the
"START" button ( ) to reserve the job, after printing is completed, scanning will start.
You cannot send a copy or scan job while printing from the bypass tray.
Printing
...
Ready to program
Make the copy settings and press the START button
( ) to reserve the job.
Printing
...
Waiting to Copy
After printing is completed, copying will start.
Printing
...
Ready to program
Make the scan settings, and press the START button
( ) to reserve the job.
Printing
...
Waiting to Scan
After printing is completed, scanning will start.
To Next Page
Loading...
