83
IDENTIFYING UNIT PROBLEMS
Removing jammed original
1
Remove the jammed original.
Remove the original from the SPF input tray while depressing the original release
button.
When failed to remove the original from the SPF input tray, remove it from the SPF
output tray.
2
Return the number of originals indicated at the end of the
message on the display, and then press the "START" button ( )
to restart copying.
Do not pull the original by force. Doing so may tear the original to cause a problem.
Keep pressing the
original release button
until you remove the
original.
To Next Page
Loading...
