: Feb. 9 2004
1
AR-M550/M620/M700 SIMULATION 8 - 35
Operation/Procedure
The system configuration is displayed. (The model names of the
installed devices and options are displayed.)
(Model code list)
Operation/Procedure
The values of the FAX send counter and the FAX receive counter are
displayed.
Operation/Procedure
The history of paper jam and misfeed is displayed.
The misfeed history is displayed sequentially from the latest one. The
max. 20 items are recorded. (The oldest one is sequentially deleted.)
This data can be used to identify the trouble position.
The latest 20 data of document jam history are displayed. (Refer to the
jam code below.)
(Jam cause code)
22-10
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function
(Purpose)
Used to check the system configuration (option,
internal hardware).
Section
Item Specifications Options
MACHINE
(Model code)
FINISHER NONE/ (Model code)
LCC NONE/ (Model code)
INSERTER NONE/ (Model code)
PUNCH NONE/ (Model code)
SYSTEM MEMORY Memory capacity (MB)
HDD Hard disk capacity (MB)
NIC NONE/ NIC
NSCN NONE/ (Network scanner)
PS3 NONE/ (PS 3 expansion kit)
FAX NONE/ (Model code)
FAX MEMORY FAX expansion memory capacity (MB)
STAMP Finish stamp NONE/ (Model code)
PCU TYPE PCU PWB type
(JPN: Japan, EX: EX Japan)
Item Display Content
MACHINE AR-555S/
M550U
Copier model (55-sheet model)
AR-625S/
M620U
Copier model (62-sheet model)
AR-705S/
M700U
Copier model (70-sheet model)
AR-555M/
M550N
Network print standard provision model
(55-sheet model)
AR-625M/
M620N
Network print standard provision model
(62-sheet model)
AR-705M/
M700N
Network print standard provision model
(70-sheet model)
INSERTER ----- Inserter not installed
AR-CF2 Inserter installed
FINISHER ----- After-process unit not installed
AR-F15 Finisher installed
AR-F16 Saddle finisher installed
PUNCH ----- Punch unit not installed
AR-PN4A Punch unit installed (2-hole)
AR-PN4B Punch unit installed (2-hole/3-hole auto
select)
AR-PN4C Punch unit installed (4-hole)
AR-PN4D Punch unit installed (4-hole, wide)
LCC ----- Side LCC not installed
AR-LC6 Side LCC installed
MEMORY 0MB Expansion memory not installed
***MB Expansion memory ***MB
HD 0MB Hard disk not installed
****MB Hard disk installed ()
NIC ----- Network card not installed
NIC Network card installed
PS
EXPANSION
KIT
----- PS expansion kit not installed
AR-PK5 PS expansion kit installed
FAX ----- FAX expansion kit not installed
AR-FX8 FAX expansion installed
NETWORKS
CANNER
----- Network expansion kit not installed
AR-NS3 Network expansion kit installed
1
EXPANSION
MEMORY
----- FAX expansion memory not installed
AR-MM9 FAX expansion memory installed
FINISH
STAMP
----- Finish stamp unit not installed
AR-SU1 Finish stamp unit installed
22-11
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function
(Purpose)
Used to check the use frequency (send/receive) of
FAX. (Only when FAX is installed)
Section FAX
Item Data
FAX SEND Number of FAX send
FAX RECEIVE Number of FAX receive
FAX OUTPUT Number of FAX print
SEND IMAGES Send quantity
SEND TIME Send time
RECEIVE TIME Receive time
22-12
Purpose Adjustment/Setup/Operation data output/Check
(Display/Print)
Function
(Purpose)
Used to check the SPF misfeed positions and the
number of misfeed at each position. (When the number
of misfeed is considerably great, it can be judged as
necessary for repair.)
Section DSPF
Item Trouble
Code Description
NO_JAM_CAUSE No jam. Also used to cancel a jam.
SPPD1_N SPPD1 not-reached jam
SPPD1_S SPPD1 remaining jam
SPPD2_N SPPD2 not-reached jam
SPPD2_S SPPD2 remaining jam
SPPD3_N SPPD3 not-reached jam
Item Display Content
SIMULATION 22-10
SYSTEM INFORMATION.
MACHINE:*******
FINISHER: ******* PUNCH: ******
LCC: ******* INSERTER: ********
SYSTEM MEMORY: **MB HDD: ***MB
NIC: ******* NSCN: ****** PS3: ******
FAX: ******* FAX MEMORY: **MB
STAMP: *******
PCU TYPE: *******
SIMULATION 22-11
FAX COUNTER DATA DISPLAY.
FAX SEND: ******** FAX RECEIVE : ********
FAX OUTPUT:********
SEND IMAGES: ******** SEND TIME: ********:**:**
RECEIVE TIME: ********:**:**
To Next Page
Loading...
