: Feb. 9 2004
1
AR-M550/M620/M700 SIMULATION 8 - 63
2) Press [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [P] key.
The adjustment value is set.
NOTE: Only the set value is changed and no printing is performed.
Operation/Procedure
(Scanner mode selection)
1) Select the number corresponding to the scanner mode to be
adjusted with 10-key. (Select one of 1 - 9.)
2) Press [START] key.
(Gamma adjustment)
1) Enter the gamma level with 10-key.
2) Press [START] key.
The greater the adjustment value is, the greater the gamma is, result-
ing in a higher contrast.
Operation/Procedure
(Copy mode selection)
1) Select the number corresponding to the copy mode to be adjusted
with 10-key. (Select one of 1 - 16.)
2) Press [START] key.
(Sharpness adjustment)
1) Enter the sharpness level with 10-key.
2) Press [START] key.
The greater the adjustment value is, the greater the sharpness is.
∗ SPF1: DSPF front surface (CCD)
∗ SPF2: DSPF back surface (CCD)
Item
Set
range
Default
0 AUTO Auto 0 - 99 50
1 1.0 Exposure level 1
2 2.0 Exposure level 2
3 3.0 Exposure level 3
4 4.0 Exposure level 4
5 5.0 Exposure level 5
6 AUTO (H) Auto (Half-tone)
7 1.0 (H) Exposure level 1 (Half-tone)
8 2.0 (H) Exposure level 2 (Half-tone)
9 3.0 (H) Exposure level 3 (Half-tone)
10 4.0 (H) Exposure level 4 (Half-tone)
11 5.0 (H) Exposure level 5 (Half-tone)
Select other than 0 - 11, and
press [START] key.
Press [START] key, or
press [CUSTOM SETTINGS] key.
46-27
Purpose Adjustment
Function
(Purpose)
Used to adjust the gamma (density gradient) of the
network scanner mode.
Section
Item Picture quality
Item
Set
range
Default
1 OC_Fine.HT Fine text (Half-tone) (OC) 0 - 127 64
2 OC_SFine.HT Super fine (Half-tone) (OC)
3 OC_UFine.HT Ultra fine (Half-tone) (OC)
4 SPF_Fine.HT Fine text (Half-tone) (SPF)
5 SPF_SFine.HT Super fine (Half-tone) (SPF)
6 SPF_UFine.HT Ultra fine (Half-tone) (SPF)
7 CIS_Fine.HT Fine text (Half-tone) (CIS)
8 CIS_SFine.HT Super fine (Half-tone) (CIS)
9 CIS_UFine.HT Ultra fine (Half-tone) (CIS)
SIMULATION 46-25
EXP.LEVEL SETUP SCANNER(ULTRA FINE). SELECT 0-11,AND
PRESS START.
0.AUTO 50 1.1.0 50 2.2.0 50
3.3.0 50 4.4.0 50 5.5.0 50
6.AUTO(H) 50 7.1.0(H) 50 8.2.0(H) 50
9.3.0(H) 50 10.4.0(H) 50 11.5.0(H) 50
50
SIMULATION 46-25
EXP.LEVEL SETUP SCANNER(ULTRA FINE). INPUT VALUE 0-99,
AND PRESS START.
0.AUTO
46-31
Purpose Adjustment
Function
(Purpose)
Used to adjust sharpness of the copy mode.
Section
Item Picture quality
Item
Set
range
Default
1 OC_AE AE mode (OC) 1 - 5 3
2 OC_CHARA Text mode (OC)
3 OC_MIX Text/Photo mode (OC)
4 OC_PHOTO Photo mode (OC)
5 SPF1_AE AE mode (SPF1)
6 SPF1_CHARA Text mode (SPF1)
7 SPF1_MIX Text/Photo mode (SPF1)
8 SPF1_PHOTO Photo mode (SPF1)
9 SPF2_AE AE mode (SPF2)
10 SPF2_CHARA Text mode (SPF2)
11 SPF2_MIX Text/Photo mode (SPF2)
12 SPF2_PHOTO Photo mode (SPF2)
13 CIS_AE AE mode (CIS)
14 CIS_CHARA Text mode (CIS)
4
15 CIS_MIX Text/Photo mode (CIS)
3
16 CIS_PHOTO Photo mode (CIS)
Press [START] key. Press [CUSTOM SETTINGS] key.
SIMULATION 46-27
GAMMA SETUP(SCNNER), SELECT 1-9, AND PRESS START.
1.OC_Fine.HT 64 2.OC_SFine.HT 64 3.OC_UFine.HT 64
4.SPF_Fine.HT 64 5.SPF_SFine.HT 64 6.SPF_UFine.HT 64
7.CIS_Fine.HT 64 8.CIS_SFine.HT 64 9.CIS_UFine.HT 64
1
SIMULATION 46-31
SHARPNESS LEVEL SETUP. SELECT 1-12, AND PRESS START.
1.OC_AE 3 2.OC_CHARA 3 3.OC_MIX 3
4.OC_PHOTO 3 5.SPF1_AE 3 6.SPF1_CHARA 3
7.SPF1_MIX 3 8.SPF1_PHOTO 3 9.SPF2_AE 3
10.SPF2_CHARA 3 11.SPF2_MIX 3 12.SPF2_PHOTO 3
13.CIS_AE 3 14.CIS_CHARA 4 15.CIS_MIX 3
16.CIS_PHOTO 3
1
SIMULATION 46-31
SHARPNESS LEVEL SETUP. INPUT VALUE 0-3, AND PRESS
START.
1.OC_AE
To Next Page
Loading...
