: Feb. 9 2004
1
AR-M550/M620/M700 SIMULATION 8 - 64
Operation/Procedure
1) Enter the sharpness level with 10-key.
2) Press [START] key.
The greater the adjustment value is, the greater the sharpness is.
Default: 3 (Normal), 1 (Halftone)
Operation/Procedure
1) Select the number corresponding to one of the following adjust-
ment items with 10-key. (Select one of 0 - 11.)
∗ Normal mode (Image density adjustment level)
∗ Normal mode (Image density adjustment level) (Half-tone mode)
∗ Auto mode
∗ Auto mode (Half-tone mode)
2) Press [START] key.
3) Enter the image density adjustment value with 10-key.
4) Press [START] key or press [P] key.
The adjustment value is set.
Operation/Procedure
(Adjustment mode selection)
1) Select the number corresponding to the copy mode to be adjusted
with 10-key. (Select one of 3 - 7.)
2) Press [START] key.
(Copy magnification ratio adjustment)
1) Select the number corresponding to the copy magnification ratio
adjustment mode to be adjusted with 10-key. (Select one of 3 - 7.)
2) Press [START] key.
3) Enter the copy magnification ratio adjustment value with 10-key.
4) Press [P] key or [START] key.
When the [START] key is pressed, copying is performed and the
adjustment value is set simultaneously.
The copy magnification ratio in the sub scan direction can be
adjusted by changing the scan speed (motor RPM).
46-39
Purpose Adjustment
Function
(Purpose)
Used to adjust sharpness of the FAX mode.
Section
Item Picture quality
Press [START] key. Press [CUSTOM SETTINGS] key.
46-45
Purpose Adjustment
Function
(Purpose)
Used to adjust the image density in the FAX mode
(600dpi).
Section
Item Picture quality
Item
Set
range
Default
0 AUTO Auto 0 - 99 50
1 1.0 Exposure level 1
2 2.0 Exposure level 2
3 3.0 Exposure level 3
4 4.0 Exposure level 4
5 5.0 Exposure level 5
6 AUTO (H) Auto (Half-tone)
7 1.0 (H) Exposure level 1 (Half-tone)
8 2.0 (H) Exposure level 2 (Half-tone)
9 3.0 (H) Exposure level 3 (Half-tone)
10 4.0 (H) Exposure level 4 (Half-tone)
11 5.0 (H) Exposure level 5 (Half-tone)
1
SIMULATION 46-39
FAX SHARPNESS LEVEL SETUP. SELECT 1-12, AND PRESS
START.
1:OC_NORMAL 3 2:OC_FINE 3 3:OC_FINE(H) 1
4:OC_SFINE 3 5:OC_SFINE(H) 1 6:OC_UFINE 3
7:OC_UFINE(H) 1 8:OC_600 3 9:OC_600(H) 3
10:SPF1_NORMAL 3 11:SPF1_FINE 3 12:SPF1_FINE(H) 1
13:SPF1_SFINE 3 14:SPF1_SFINE(H) 1 15:SPF1_UFINE 3
16:SPF1_UFINE(H) 1 17:SPF1_600 3 18:SPF1_600(H) 1
19:SPF2_NORMAL 3 20:SPF2_FINE 3 21:SPF2_FINE(H) 1
22:SPF2_SFINE 3 23:SPF2_SFINE(H) 1 24:SPF2_UFINE 3
25:SPF2_UFINE(H) 1 26:SPF2_600 3 27:SPF2_600(H) 1
28:CIS_NORMAL 3 29:CIS_FINE 3 30:CIS_FINE(H) 1
31:CIS_SFINE 3 32:CIS_SFINE(H) 1 33:CIS_UFINE 3
34:CIS_UFINE(H) 1 35:CIS_600 3 36:CIS_600(H) 1
SIMULATION 46-39
FAX SHARPNESS LEVEL SETUP. INPUT VALUE 1-3, AND PRESS
START.
1:OC_NORMAL
Press [START] key. Press [CUSTOM SETTINGS] key.
48
48-1
Purpose Adjustment
Function
(Purpose)
Used to adjust the copy magnification ratio (in the main
scanning and the sub scanning directions).
Section Optical (Image scanning)
Item Picture quality
Item
Set
range
Default
0 TRAY SELECT Paper feed tray selection 0 - 99 50
1 COPY START Copy START (Default)
2 MAGNIFICATION Print magnification ratio
3 CCD (MAIN) SCAN main scanning
magnification ratio
adjustment (CCD)
4 CCD (SUB) SCAN sub scanning
magnification ratio
adjustment (CCD)
5 SPF (SUB) SPF front surface
magnification ratio
adjustment (Sub scan)
6 CIS (MAIN) SPF back surface
magnification ratio
adjustment (CIS main scan)
7 SPF (MAIN) SPF front surface
magnification ratio
adjustment (Main scan)
Normal display NOW COPYING.
ERROR display Door open DOOR OPEN.
Jam JAM
Paper empty PAPER EMPTY.
SIMULATION 46-45
EXP.LEVEL SETUP SCANNER(600dpi). SELECT 0-5,AND PRESS
START.
0.AUTO 50 1.1.0 50 2.2.0 50
3.3.0 50 4.4.0 50 5.5.0 50
6.AUTO(H) 50 7.1.0(H) 50 8.2.0(H) 50
9.3.0(H) 50 10.4.0(H) 50 11.5.0(H) 50
50
SIMULATION 46-45
EXP.LEVEL SETUP SCANNER(600dpi). INPUT VALUE 0-99, AND
PRESS START.
0.AUTO
To Next Page
Loading...
