Sharp DV-NC60W - Basic Connection; Connecting to ANTENNA IN;RF out

GB
14
Basic Connection
Caution:
• Be sure to turn off the Unit and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
•
Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO cable .
• Be sure to keep the Unit connection cables separate from the TV antenna cable when you install the Unit,
because it may cause electrical interference when you are watching television programmes.
Connecting to ANTENNA IN/RF OUT
The connection method differs depending on the type of TV.
S-VIDEO
COMPONENT
COMPONENT
S-VIDEO
OUTPUT
SELECTOR
DIGITAL
AUDIO
LINE OUT 2
DVD
AUDIO
L
R
C R
C B
Y
VIDEO
DVD/VCR
LINE OUT 1 LINE IN 1
VCR
AUDIO
L
R
ANTENNA IN
RF OUT
VIDEO
AUDIO
L
R
TV
To RF OUT jack
To ANTENNA
IN jack
To antenna
input jack
RF cable
(Supplied)
Antenna cable
This Unit
• The signal from RF OUT is a Television Signal and VCR’s playback signal. The DVD’s playback signal will not be output.
DVNC60W(E)#014_020.pm6 01.10.19, 4:42 PM14
Downloaded from: http://www.usersmanualguide.com/