GB
78
Preparing to Use The DVD
The following steps are necessary to display the DVD screen on the
TV.
When connecting the Unit and the TV using
the DVD output jack
TV
Turn on the TV and switch the TV channel to the external input
“VIDEO” or “AV” channel connected to DVD output jack.
This Unit
1 Press OPERATE.
• The start up screen is displayed on the TV screen.
2 Move VCR/DVD CHANGE Switch on the remote control to
DVD.
When connecting the Unit and the TV using
only the DVD/VCR shared output jack
TV
Turn on the TV and switch the TV channel to the external input
“VIDEO” or “AV” channel connected to DVD/VCR shared output jack.
This Unit
1 Press OPERATE.
2 Move VCR/DVD CHANGE Switch on the remote control to
DVD.
3 Press VCR/DVD SELECTOR to enter the DVD mode.
•
The DVD Output indicator will light up and the start up screen
will be displayed on the TV screen.
DVD / CD / VIDEO CD PLAYER
VCR DVD
(LINE 2)
PLAY STOP
OPEN/
CLOSE
C H
EJECT/
STOP
OPERATE
PLAY/X2REW
L(MONO)-AUDIO-R
LINE IN 2 VIDEO
REC
DVD
OUT
OPERATE
DVD Output
indicator
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
G-CODE
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ZOOM
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
DVNC60W(E)#078_084.pm6 01.10.11, 9:32 am78
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
