DVD Setup
GB
40
6 Press ENTER to confirm the “TV MODE” setting.
• When you have completed the setting above, press RETURN
to exit the SETUP screen. However, if you want to specify the
“NTSC” setting in succession, proceed to step 1 below.
Setting up for Playback of an NTSC Disc
• Before setting the “NTSC” (video signal system), perform the step
1 to 2 on the previous page.
1 Press ENTER and then use ' or " to select “NTSC”.
2 Press ENTER to display the items you can select.
3 Use ' or " to select “NTSC” or “NTSC→PAL”.
(Example) Selecting “NTSC”
TV MODE SETUP
TV MODE:
NTSC: NTSC→PAL
NTSC
NTSC→PAL
• About the NTSC settings:
NTSC: Select this setting when you have an NTSC TV
or an NTSC-compatible Multi-System TV
connected to the Unit.
NTSC
→→
→→
→PAL: Select this setting when you have a PAL TV
connected to the Unit. This setting converts the
NTSC signal to a modified PAL signal.
• When you play back the PAL discs, either the setting of “NTSC→PA L ”
or “NTSC” can be used on a PAL TV or a Multi System TV.
4 Press ENTER to confirm the setting.
5 If you want to exit the SETUP screen and return to the normal
screen, press RETURN.
• If you want to go on and specify other settings (PARENTAL
SETUP, AUDIO SETUP, DISC LANGUAGE or OSD
LANGUAGE SETUP), press ' or " to display other SETUP
screen without pressing RETURN.
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
G-CODE
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ZOOM
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
DVNC60W(E)#039_047.pm6 01.10.11, 9:25 am40
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
