GB
36
VCR Display Information
The tape counter and VCR mode can be shown on the screen while you are playing back a tape or watching a
broadcast on the video channel.
How to Display Indicators
1 Turn on your TV and select the video channel.
2 Press OPERATE to turn on the Unit. Mode indicators are displayed in the AUTO display screen.
3 Each time ON SCREEN is pressed, the screen changes as follows:
AUTO DISPLAY
When an operation button, number buttons, or CH ' / " is pressed, the current mode or the number of the
channel will be displayed in the upper section of the TV screen for about 3 seconds.
• When you record a video signal output from this Unit on another VCR, press ON SCREEN to select Display Off. (If the
mode indicator is displayed on the screen, it is also recorded on the tape.)
VCR Front Panel Display
Each time DISPLAY on the Remote is pressed, the display changes in the following way. (However, the
following is the case when the clock time is set and displayed in the 12-hour system.)
• Tape counter mode ....... The current tape position will be displayed.
• Clock mode.................... The current time will be displayed.
• VCR OPERATION .......... The current operation (example: PLAY, STOP) will be displayed.
The meaning of the main indicators is shown below. (This list does not include all indicators.)
Display Examples
• The default time and date will not be displayed if the clock has not been set.
• The Unit will return to Tape counter mode each time it is switched on.
• If you are recording from this Unit to another, make sure you remove the display from the screen otherwise it will be
recorded.
2
S.PICTURE ON NICAM
SP STOP 11:30 L R
I/
II
21/08 00 0:00.00
REPEAT
12:30 19
Display example
Operating mode
Simple Recording timer
S. PICTURE
(Sharp Super Picture)
Tape Speed
Clock display
Calendar display
Audio Output indicator
Programme channel
position
Multiplex sound indicator
(
: stereo)
Repeat display
Real time tape counter
STOP, CASSETTE IN
PLAY, X2
VSF, FF
VSR, REW
SLOW
F ADV.
STILL
REC
REC PAUSE
DPSS
AUTO Display → FULL Display → Counter Display → Display OFF
Tape counter mode → Clock mode → VCR OPERATION
Cassette-In
Indicator
Play/Double Speed
Playback
Rewind
Fast Forward
Still/
Frame Advance
When AC power cord
is first plugged in
Slow
Record
Rec Pause
Stop
Recording with the Timer/
Simple Recording Timer
Video Search Rewind
Video Search Forward
LINE IN 1/2
Recording Mark
(When operating mode
is displayed)
DVNC60W(E)#036.pm6 01.11.14, 10:13 AM36
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
