DVD Setup
39
GB
TV MODE Setting
Preparation
• Press OPERATE. Then move the VCR/DVD CHANGE Switch to
DVD.
1 While this Unit is stopped, press DVD SETUP to display the
SETUP screen.
When you use the Unit for the first time, press DVD SETUP. “OSD
LANGUAGE SETUP” screen appears. You should set the lan-
guage to be used for the OSD (On Screen Display). See “OSD
LANGUAGE Setting” on page 50.
2 Use ' or " to select the “ TV MODE SETUP”.
TV MODE SETUP
TV MODE:
NTSC: NTSC→PAL
3 Press ENTER and then use ' or " to select “TV MODE”.
4 Press ENTER to display the items you can select.
5 Use ' or " to select
LB
4:3
,
PS
4:3
or
16
:
9
.
(Example) Selecting
PS
4:3
.
TV MODE SETUP
TV MODE:
NTSC:
•
PS
4:3
— (Pan & Scan mode): When wide-screen video
material is played, this mode clips the right and left sides of
the image so that it can be viewed on a conventional TV
screen.
• Some wide-screen DVDs that do not permit Pan & Scan mode
playback are automatically played in letterbox mode (black bands
top and bottom).
•
LB
4:3
— (Letterbox mode): When wide-screen video material
is played in this mode on a conventional TV screen, black
bands appear at the top and bottom of the screen.
•
16
:
9
— (Wide-screen TV): This is the correct mode for playing
wide-screen videos on a wide-screen TV.
• You must also set the screen mode on your wide-screen TV to
“FULL”.
Cut off when a wide-screen video
image is played.
The actual appearance of the image
depends on the screen mode setting
of your wide-screen TV.
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
G-CODE
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ZOOM
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
DVNC60W(E)#039_047.pm6 01.10.11, 9:25 am39
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
