GB
90
VIRTUAL DOLBY (QSURROUND) setting
This function allows you to enjoy a “surround sound” effect when you
are using an analogue connection (using LINE 1 OUT on this Unit) to
2-channel audio equipment (TV, etc.).
Preparation
To use the VIRTUAL DOLBY (QSURROUND) function
• Set the “COMPRESSION” setting in “AUDIO SETUP” to “OFF” (see
page 45).
Refer to the table below about the types of audio format with which
VIRTUAL DOLBY (QSURROUND) works.
1 Press FUNCTION CONTROL during playback.
• The FUNCTION CONTROL screen appears.
2/5
8/3‰
‰1:3‰:‰8
2
ENGLISH
1
1
5 1ch
ON
ON
ON
.
DVD
2 Use ' or " to select and then press ENTER.
ON
DVD
3 Press ' or " to toggle VIRTUAL DOLBY between “ON” and
“OFF”.
4 While “ON” is selected, use \ or | to change the level setting.
ON
DVD
5 Press ENTER to confirm the setting.
• You can exit the FUNCTION CONTROL screen by pressing
RETURN or FUNCTION CONTROL.
About the Function Control Screen
Dolby
Digital
Types of audio recorded on the disc
✕✕
Dolby Digital
2ch/Linear
PCM
Dolby
Pro Logic
MPEG Audio
Ver. 2.0/
DTS
• VIRTUAL DOLBY (QSURROUND) does
not operate on Audio CDs.
• VIRTUAL DOLBY (QSURROUND) does
not operate when you set the
“COMPRESSION” setting in “AUDIO
SETUP” to “ON”.
• VIRTUAL DOLBY (QSURROUND) does
not operate when you are using a Digital
connection.
• QSURROUND™ is a trademark of
QSound Labs, Inc.
• VIRTUAL DOLBY (QSURROUND) does
not operate when you play back a disc
recorded using Linear PCM or DTS
format.
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
G-CODE
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ZOOM
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
DVNC60W(E)#085_092.pm6 01.10.11, 9:35 am90
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
