DVD Setup
GB
46
2 Use ' or " to select the “ AUDIO SETUP”.
AUDIO SETUP
COMPRESSION: OFF
MPEG:
DIGITAL:
BITSTREAM
BITSTREAM
3 Press ENTER and then use ' or " to select “COMPRESSION”.
4 Press ENTER to display the settings you can select.
AUDIO SETUP
COMPRESSION: OFF
ON
MPEG: OFF
DIGITAL:
5 Use ' or " to select “ON” or “OFF”.
• Use of the “OFF” setting is recommended when the Unit is
connected to audio equipment.
6 Press ENTER to confirm the setting.
• When you have completed the above setting, press RETURN
to exit the SETUP screen. However, if you want to specify the
“ DIGITAL” setting in succession, proceed to step 1 below.
• Whenever the “COMPRESSION” setting is “ON”, VIRTUAL Dolby setting is
automatically changed to “OFF”.
Setting the DOLBY DIGITAL
When playing a disc recorded using Dolby Digital (5.1ch)/MPEG
Audio (5.1ch), you can specify either “BITSTREAM” or “D-PCM”/
“PCM” as the digital type output.
• Before setting the “ DIGITAL” , perform the step 1 to 2 on pages
45 and 46.
1 Press ENTER and then use ' or " to select “ DIGITAL”.
2 Press ENTER to display the settings you can select.
AUDIO SETUP
COMPRESSION: ON
MPEG:
D-PCM
DIGITAL:
BITSTREAM
BITSTREAM
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
G-CODE
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ZOOM
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
DVNC60W(E)#039_047.pm6 01.10.11, 9:25 am46
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
