GB
20
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
G-CODE
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ZOOM
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
Auto Tuning System
This Unit is equipped with an Auto Tuning System to provide easier
set up of the Unit. After following the instructions for “Basic
Connection” on pages 14 and 15 and “Adjusting the Video Channel”
on page 18, turn on your TV, press OPERATE to turn on the Unit,
and select the video channel. The Unit will automatically display the
setting screens as shown below.
SYSTEM
setting screen
AUTOMATIC TUNING
screen
Press SET. (Manual operation)
Press VCR MENU to cancel the next step.
CLOCK
setting screen
Press SET. (Manual operation)
Normal screen appears.
Selection of broadcast system(SYSTEM)
(I, B/G, D/K or M) that correspond with your
area. (See page 26, step 3.)
Selection of language to be used for
the On Screen Display. (See page 35.)
Setting and sorting the channels for your
area. (See page 26.)
Setting the present time. (See page 33.)
LANGUAGE
setting screen
Press SET. (Manual operation)
• If the Language selection and Auto Tuning have already been
performed, the Clock setting screen will first appear. To reset all VCR
settings and perform the Auto Tuning from the Language setting
screen, see page 35. (Perform “VCR-RESET”)
DVNC60W(E)#014_020.pm6 01.10.11, 9:19 am20
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
