GB
38
About the SETUP Screen
This section describes how to specify various basic settings using the
SETUP screen. The list below shows all the items you can set and
adjust. See the following pages for details on each setup procedure.
• The setting procedures described on the following pages are
available only in STOP mode.
• The OSD (On Screen Display) screens used in this Operation
Manual are purely for the purposes of explanation. The actual
displays may differ slightly from what is shown here.
Setup item list
Main Menu
(Example) TV MODE SETUP
DVD Setup
• Numbers in refer to the pages where the setting
procedures are described.
TV MODE SETUP
TV MODE:
NTSC: NTSC→PAL
39
41
45
48
50
•
Use this setting for increasing the average volume
of Dolby Digital audio when playing a DVD.
• Use this setting for specifying either “BITSTREAM”
or “D-PCM”/“PCM” as the digital type output.
• Use this setting for selecting languages of
subtitle, audio track and disc menu recorded on
a disc.
• Use this setting for selecting OSD languages.
TV MODE SETUP
PARENTAL SETUP [1 to 8 (ON)/OFF]
AUDIO SETUP
DISC LANGUAGE
OSD LANGUAGE SETUP
COMPRESSION [ON/OFF]
SUBTITLE
DIGITAL
AUDIO
TV MODE
NTSC
MENU
ENGLISH
ENGLISH
NTSC
NTSC→PAL
CHINESE
OTHER
Languages you
can select are
same as above.
Languages you
can select are
same as above.
4 : 3
16 : 9
LB
PS
4 : 3
BITSTREAM
D-PCM
MPEG
BITSTREAM
PCM
• Specifies the setting for the type of TV connected
and the playback format for wide-screen video
material.
• Used to specify the colour system in accordance
with the TV connected when playing back an
NTSC disc.
• Sets or changes the parental level (1 to 8).
• Sets the password used to prevent the parental
level from being changed too easily.
DVNC60W(E)#038.pm6 01.10.11, 9:24 am38
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
