VCR Setup
29
GB
/
PLAY
STOP
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
G-CODE
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ZOOM
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
VCR/DVD COMBINATION
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
8 Select the video channel on your TV again.
• If the channel you tuned the Unit to and the one on the TV do
not match, repeat steps 5 through 7.
9 Press SET. (This will set channel position 48 in memory and
return to channel position 49 for tuning.)
10 If you want to set additional channels, repeat steps 3 through 9.
11 Press VCR MENU to return to the normal screen.
• Use Auto Tuning normally for presetting.
1 Auto tuning may not be able to preset some broadcasts.
Use manual tuning to preset.
2 The same broadcast may be preset more than once.
Select the channel with the clearer broadcast.
3 After auto tuning is completed, confirm the preset channels in
order.
If no sound can be heard from any of the preset channels, reset the
SYSTEM (I, B/G, D/K, M) with manual tuning.
DVNC60W(E)#023_032.pm6 01.10.11, 9:21 am29
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
