Sharp MX-2010U

MX-3610N MX-PNX5A/B/C/D (PUNCH MODULE) 25 – 3
D. Saddle finisher exterior attachment
1) Fix the front inner cover with screws, and close the front
cover.
2) Fix the front lower cover with a screw.
3) Fix the rear cover with a screw.
E. Saddle finisher connection
1) Install the saddle finisher to the main unit.
2) Connect the connector.
F. Punch jam processing label attachment
1) Open the front cover, attach the punch jam processing label.
1
2
2
3
2
1
2
2
1
1
2
000
-
0000000
-
0000
1
2
Label attachment reference