MX-3610N Necessary works before moving the machine 36 – 1
MX-3610N
Service Manual
[36] Necessary works before moving the machine
1) If the following options are installed, remove all of them from
the machine.
• Large capacity tray
• Finisher
• Paper pass unit
• Saddle finisher
2) Remove the following consumable parts from the machine.
• Paper
• Toner cartridges
• Development cartridge
3) Lock the following sections.
• Scanner (Optical section)
• Paper cassette lift plate
Since the hard disk drive is built in the machine, use care not to
exert vibrations or shocks to the machine when in transit.
To Next Page
Loading...
