MX-3610N MX-FR25U (DATA SECURITY KIT) 12 – 2
D. Turn ON the power of the main unit
1) Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
E. Enable setting of functions
1) Enter the product key to enable the functions.
a) Enter the system setting mode.
b) The machine enters the product key input mode.
c) Enter the product key.
d) Press the registration key.
2) After completion of the product key input, turn OFF the power
switch on the operation panel of the machine, and turn OFF
the main power switch.
3) Turn ON the main power switch and the power switch on the
operation panel.
F. Confirmation of function enable
Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.
To Next Page
Loading...
