Sharp MX-7090N

1-137
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
STATUS INDICATORS
These indicators show the status of the machine. The green indicator lights up or blinks according to the job
management of the machine. The red indicator lights up or blinks when an error occurs. It lights up when an error occurs
but the machine is still able to be used, and blinks when the machine is not able to be used due to an error. In setting
mode, you can change the operation settings for the status indicators.
PART NAMES
(1) Indicator (Red)
The red indicator lights up or blinks when an error occurs.
(2) Indicator (Green)
The green indicator lights up or blinks according to the
job management of the machine.
(1)
(2)
In Auto Power Shut-Off mode, the status indicators go off.
To change the conditions for the status indicators to light up or blink:
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Status Indicator Setting].