4-85
SCANNER►OTHER FUNCTIONS
REMOVING CHROMATIC COLORS FROM THE
SCANNED ORIGINAL BEFORE TRANSMISSION
(DROP OUT COLOR)
1
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
► AUTOMATIC DOCUMENT FEEDER (page 1-90)
► DOCUMENT GLASS (page 1-92)
2
Tap the mode display to switch to the initial screen of each mode.
► Changing mode from each mode (page 4-8)
3
Specify the destination.
► RETRIEVING A DESTINATION FROM AN ADDRESS BOOK (page 4-14)
► VIEWING A LIST OF THE SELECTED DESTINATIONS (page 4-17)
► USING A SEARCH NUMBER TO RETRIEVE A DESTINATION (page 4-18)
► ENTERING AN ADDRESS MANUALLY (page 4-19)
► SPECIFYING A NETWORK FOLDER (page 4-20)
► RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK (page 4-21)
► USING A TRANSMISSION LOG TO RESEND (page 4-23)
4
Tap the [Others] key, and then tap the [Drop Out Color] key.
A checkmark appears on the icon.
After the settings are completed, tap .
To cancel the drop out color setting
Tap the [Drop Out Color] key to uncheck it.
To Next Page
Loading...
