Sharp MX-7090N

2-104
COPIER►OTHER FUNCTIONS
• Mixed originals cannot be used in combination with the following functions:
Standard size setting or size entry setting for the Original Size, folding setting other than Z-Fold
If different widths are selected for mixed originals, the following functions cannot be used.
Staple, Punch, N-Up, Offset, Booklet, Full Bleed Copy
• The mixed size original function cannot be used to copy originals that are the same size but are placed in different
orientations (8-1/2" x 11" and 8-1/2" x 11"R (A4 and A4R), etc.).
To set the machine to always scan mixed originals
• In "Settings (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Original Feeding
Mode].
• Output, N-Up, and other functions will have the same settings as the first page.
1
Tap the [Others] key, and tap the [Mixed Size Original] key.
2
Tap the [Same Width] key or the
[Different Width] key as appropriate for
the originals.
After the settings are completed, tap twice.
To cancel the mixed size original setting
Tap the [Off] key.
3
Place the original face up on the
document feeder tray.
Place the original as shown on the Mixed Size Original
screen.
For mixed size originals, set "Original" to "Auto".
4
Tap the [Color Start] or [B/W Start] key to start copying.
68
4
3
8½x11 5½x8½
8½x11 8½x11
8½x11 8½x11
8½x14
11x17
Others
Mixed Size Original
Preview
Start Start
Off
Same Width
Place the same width
originals.
Different Width
Back
Change Size/Direction.
Original
2-Sided Copy
CA
B/W
Proof Copy
Color
11" x 17"(A3)
8-1/2" x 14"(B4)
11" x 17" (A3)
Place the originals with
the corners aligned
together in the far left
corner.
8-1/2" x 14"
( B4 )