2-41
COPIERâ–ºBASIC PROCEDURE FOR MAKING COPIES
OUTPUT
Configure the output settings for copies using Sort, Group, Offset, Separator Page, Staple, Punch, or Fold. Also specify
the output destination of copies.
You can tap the [Output] key in normal mode to configure settings for all output functions.
Settings for the staple and punch functions can also be configured from simple mode.
Output Tray
Specify the destination to output copies.
If a finisher (100-sheet stapling) or saddle stitch finisher (100-sheet stapling) is installed, you can select [Upper Tray],
[Middle Tray], or [Lower Tray].
â–º CHANGING OUTPUT DESTINATION (page 2-43)
Offset
This function outputs copies while shifting them set by set. Setting the checkbox to enables the offset function, and
setting it to
disables the function.
• This function is available when a finisher or saddle stitch finisher is installed and [Upper Tray] or [Lower Tray] is selected
as the output tray.
• The offset can be used with a custom size paper.
Selecting the staple function clears the Offset checkmark automatically.
Preview
Start
Others
Start
CA
B/W
4
3
68
Proof Copy
1
No. of copies
1
Output Tray
Output
Lower Tray
Auto
Default Settings
Offset
Middle
Tray
Punch
Separator
Page
FoldStaple
Upper Tray
Group
Sort
Shift Position to Have Margin
Erase
Erase Shadow Around
Margin Shift
Put Multiple Pages in A Page
N-Up
Change Size/Direction.
Original
2-Sided Copy
8½x11 8½x11
8½x14
11x17
Color
[Output] screen of normal mode
Offset enabled Offset disabled
To Next Page
Loading...
Need help?
General
