Sharp MX-7090N - Ps Pass-Through

3-91
PRINTER►CONVENIENT PRINTING FUNCTIONS
PS PASS-THROUGH
Select whether PostScript commands are output directly from the application instead of from the printer driver.
Normally, "PS Pass-Through" must be checked for normal use. Some applications output PostScript code that cannot
be controlled by the printer driver and features such as N-up, Watermark are not set correctly by the driver. In this case,
cancel the check, and these feature settings of the driver might be available.
When this item is unchecked, EPS illustrations in the document may be printed at low-resolution image or may not be
printed.
(1) Click the [Detailed Settings] tab.
(2) Select the function from the "PS Pass-Through".
• This function is available in a Windows environment.
• Printer driver PS can use this function.
Windows
(2)
(1)