Sharp MX-7090N - Pcl Settings; Postscript Settings

7-85
SYSTEM SETTINGS►SYSTEM SETTINGS
PCL Settings
This is used to set the symbol sets, fonts, and line feed code used in a PCL environment.
Settings
PostScript Settings
When an error occurs during PostScript printing, these settings determine whether or not an error notice is printed and
whether or not the PostScript data is received in binary format.
OOXML Settings
To print an Excel file by direct print, select a sheet (with the part to be printed selected) or the entire book.
Print Release Settings
Select this option to use the E-mail printing. The memory area for saving print release jobs is 64 GB. For detailed
information, see "Print Release Settings Guide".
Setup Items Settings Setting
PCL Symbol Set Setting Specify the symbol set used for printing. • Select from 35 items.
PCL Font Setting Select a font used for printing.
• Internal Font
• Extended Font
• (List of internal fonts when
extended fonts are not
installed.)
PCL Line Feed Code
This setting is used to select how the printer responds when a line
feed command is received.
• 0.CR=CR; LF=LF; FF=FF
• 1.CR=CR+LF;
LF=LF;FF=FF
• 2.CR=CR; LF=CR+LF;
FF=CR+FF
• 3.CR=CR+LF; LF=CR+LF;
FF=CR+FF
Wide A4
When this is enabled, 80 characters per line are printed on the
8-1/2" x 11" (A4) size paper using a 10-pitch font. (When this
setting is disabled, up to 78 characters are printed per line.)
• (Enabled)
• (Disabled)
Setup Items Settings Setting
Screen Settings Configure image settings for PostScript.
Standard, Text/Photo, Text,
Photo, Dot (High Line
Number), Dot (Low Line
Number)
Print PS Errors
When a PS (PostScript) error occurs during PostScript printing,
this setting determines whether or not an error notice is printed.
(Enabled)
(Disabled)
Binary Processing Configure image settings for PostScript.
(Enabled)
(Disabled)