Sharp MX-7090N

1-52
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
REMOTE OPERATION OF THE MACHINE
Remotely operate the machine on your computer.
You can operate the machine from the same panel as the machine's operation panel that is displayed on your PC, with
the same feel as operating in front of the machine.
The remote operation function can only be used on one computer at a time.
Before you can use the remote operation function, the following preparation is required.
•
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Condition
Settings] → [Remote Operation Settings] → [Remote Software Operation] and select [Allow] for [Operational Authority].
• Connect the machine to the network.
• Install a VNC application software (recommended VNC software: RealVNC) in your computer.
After the preparation is completed, follow the operation described below to set up the function.
Example: RealVNC
1
Start the VNC viewer, enter the IP
address of the machine in the "VNC
Server" entry box, and click the
[Connect] button.
Check with the administrator of the machine for its IP address.
2
Follow the message on the operation panel of the machine to permit the
connection.
When the machine is connected to a VNC application software, appears on the system bar of the machine's touch panel.
If you wish to disconnect, exit the VNC application software or tap .
Use the operation panel in the same way as you would on the machine. However, you cannot enter values in series by
continuously clicking the key.
Start
Colour
Start
Preview
Color Mode
Full Color
Paper Select
Auto
Exposure
Auto
Original
Auto 8½x11
2-Sided Copy
1-Sided→1-Sided
Output
Copy Ratio
100%
Others
Plain 1
Send and print
Call Eco Program
Store Data in Folder
File
Store Data Temporarily
Quick File
1
4
7
5
8
6
9
2
0
3
C
1
5½x8½
8½x14
11x17
21
3
4
No. of copies
CA
B/W
8½x11
LINE PRINTER
E-mail
HDD
File retrieve
Sharp OSA
Job Management
Copy
Proof Copy
Plain 1
8½x11
Plain 1
8½x11
8½x11
8½x11
8½x11
8½x11
8½x11
56
87
Start
Colour
Start
Preview
Color Mode
Full Color
Paper Select
Auto
Exposure
Auto
Original
Auto
8½x11
2-Sided Copy
1-Sided→1-Sided
Output
Copy Ratio
100%
Others
Plain 1
Send and print
Call Eco Program
Store Data in Folder
File
Store Data Temporarily
Quick File
1
4
7
5
8
6
9
2
0
3
C
1
5½x8½
8½x14
11x17
2
1
3
4
No. of copies
CA
B/W
8½x11
LINE PRINTER
E-mail
HDD
File retrieve
Sharp OSA
Job management
Copy
Proof Copy
Plain 1
8½x11
Plain 1
8½x11
8½x11
8½x11
8½x11
8½x11
8½x11
56
87
Operate the machine
using your computer
screen.
Your computer
Network
Operation panel
The machine