4-21
SCANNER►ENTERING DESTINATIONS
RETRIEVING A DESTINATION FROM A GLOBAL
ADDRESS BOOK
When an LDAP server is configured in the "Settings (Web version)", look up an address in a global address book and
retrieve the destination address for Scan to E-mail.
In normal mode, you can add an address retrieved by searching to the address book. However, addresses of the FTP
transmission cannot be stored from the machine.
1
In Easy mode
Tap the [Global Address Search] key.
In Normal mode
In the base screen or address book
screen, tap [Global Address Search]
on the action panel.
2
Tap [Destination] and tap the LDAP
server to be used.
• If an authentication screen for the LDAP server
appears, enter your user name and password.
• If only one LDAP server has been stored, it is not
necessary to take step 2. In this case, start from step 3.
CA
Preview Auto Set
Original
Address E-mail Address
Detail
Start
Color
Start
Address Book Sending History
Global
Address Search
Scan to HDD/
USB
B/W
8½x11
Preview
Start
Scan Size
Auto Auto
Color Mode
Resolution
File Format
Original
Exposure
Others
100%
Send Size
Subject
File Name
Address Touch to input Address
Verification Stamp
Call Search Number
Options
Sending History
Global Address Search
CA
Send
Destination Link
Address Book
Auto/Mono2
200x200dpi
PDF
Auto
8½x11
8½x11
Call Program
Call Registered settings
Specified by System Settings
Preview
Enter
Initials
Target
Start
Search Start
CA
To Next Page
Loading...
