Sharp MX-7090N - Page 343

3-31
PRINTER►FREQUENTLY USED FUNCTIONS
(1) Click the [Layout] tab and set the [Edge-to-Edge Printing] checkbox to set to icon.
(2) Click the [Finishing] tab and select [Saddle Stitich].
(3) Configure Trimming settings.
(1) Click the [Trimming...] button.
(2) Set the [Trimming] checkbox to set to icon.
(3) Specify "0.200 inches (5.0 mm)".
(1)
(1)
(2)
(2)