6-13
MANUAL FINISHING►OPERATION OF MANUAL FINISHING
TRIMMER SETTING
If a trimmer unit is installed, you can trim off excess edges of paper for a finer finish.
Trimmer Setting (when Saddle Stitch is selected)
To select the Trimmer Setting, a trimmer unit must be installed.
If you select [All Pages] for the number of copies/number of pages, specify "1" for the number of sets to be printed.
If you set more copies or pages than the number of copies or pages that can be stapled, a message is displayed and the
[Start] key is disabled.
See "Specifications" in the "Start Guide" and specify the number of copies or pages that can be stapled.
1
With Saddle Stitch selected, tap the
[Trimmer Setting] key.
2
Tap the [On] key, and specify the
trimming width.
Tap the numeric value display field of the trimming width,
and enter the allowable range using the numeric keys.
Otherwise, tap the key to enter the values.
After the settings are completed, tap .
To cancel the trimmer setting:
Tap the [Off] key.
Upper Tray
Output Tray Inserter
Off
1 Staple
at Back
Saddle
Fold
Half Fold
C-Fold
1 Staple
at Front
2 Staples
Trimmer
Setting
Saddle
Stitch
Off
Off
Accord-
ion Fold
Copies/Pages
Type and Size
Double
Fold
Z-Fold
Detail
Punch Fold
Middle Tray
Lower Tray
Start
CA
Upper Tray
Lower Tray
Plain 1
Plain 1
2/3-Hole
Punch
8½x11
8½x11
Staple
Upper Tray
Output Tray Inserter
Staple
Off
1 Staple at
Back
Saddle Fold
Half Fold
C-Fold
1 Staple at
Front
2 Staples
Trimmer
Setting
Saddle
Stitch
Off
Off
Accord-
ion Fold
Copies/Pages
Type and Size
Double
Fold
Z-Fold
Detail
Punch Fold
Middle Tray
Lower Tray
Start
CA
Upper Tray
Lower Tray
Plain 1
Plain 1
2-Hole/3-
Hole Punch
8½x11
8½x11
Trimmer Setting
Set Trimming Width.
On
(2.0
῀
20.0)
mm
2 0
Off
To Next Page
Loading...
