4-39
FACSIMILEâ–ºCONVENIENT FAX FUNCTIONS
International transmission mode setting
To set the international transmission mode, complete Editing and deleting auto-dial numbers (page 4-41).
If you select a speed other than 33,600 bps (maximum speed), a checkmark will appear next to "TX Speed" when you
return to the option setting screen. This setting is not effective for polling transmission.
To remove the checkmark and return the transmission speed setting to "33,600 bps (maximum speed)", press the
[LOGOUT]
key ( ).
• When sending a fax to a foreign country, telephone line conditions can sometimes distort the fax or interrupt the
transmission. Selecting the right international transmission mode can help alleviate these problems.
• If errors frequently occur when sending a fax to a foreign country, try each of modes 1 to 3 and select the mode that
enables the best transmission.
1
Select "International TX" with the [ ] or [ ] key press the [OK] key.
2
Select the desired mode with the [ ] or [ ] key.
If you select a setting other than "Off", a checkmark will appear next to "International TX" when you return to the option
setting screen.
To remove the checkmark and return the international transmission mode to "Off", press the [LOGOUT] key ( ).
To Next Page
Loading...
Need help?
General
