6-5
TROUBLESHOOTING►TROUBLESHOOTING
Paper size for a paper tray cannot be
set.
Press the [COPY] key to select copy mode.
2-2
Copying or printing is performed.
→ Set the paper size after copying or printing is complete.
–
The machine has stopped temporarily due to running out of
paper or a misfeed.
→ Load paper or remove the misfeed, and then set the paper size.
6-14
A copy job stops before it is finished.
The paper output tray is full.
→ Remove the output in the paper output tray to resume printing.
–
The tray is out of paper.
→ Load paper.
1-17
The display turns off.
Any other indicators turned off.
→ If other indicators are lit, the machine is in "Preheat mode". Press
any key on the operation panel to resume normal operation.
1-13
[ENERGY SAVE] indicator blinks.
→ The machine is in auto power shut-off mode. Press the [ENERGY
SAVE] key to resume normal operation.
1-12
Lighting fixture flickers.
The same power outlet being used is for the lighting fixture and
the machine.
→ Connect the machine to a power outlet which is not used for other
electric appliances.
–
Problem Cause and solution Page
To Next Page
Loading...
