6-18
TROUBLESHOOTINGâ–ºPAPER JAM
Misfeed in the paper feed area A
1
Carefully remove the misfed paper.
Turn the roller rotating knob in the
direction of the arrow to assist in
removing it.
Be careful not to tear the misfed paper during removal.
The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or
injury.
When removing misfed paper, do not touch or damage the photoconductive drum and the transfer roller.
2
Close the side cover.
The message " Clear paper path." will be cleared and copying will be possible.
• When closing the side cover, press on around the handle.
• If the message does not clear, check again to make sure that no pieces of paper remain.
Roller rotating knob
Fusing unit
To Next Page
Loading...
Need help?
General
