6-20
TROUBLESHOOTING►PAPER JAM
Misfeed in the transport area C
5
Close the side cover.
The message " Clear paper path." will be cleared and copying will be
possible.
• When closing the side cover, press on the handle.
• If the paper was torn, make sure that no torn pieces remain in the machine.
• If the message does not clear, check again to make sure that no pieces of paper remain.
1
Remove the misfed paper.
Be careful not to tear the misfed paper during removal.
2
Return the duplex conveyor lever to its original position and close the side
cover.
The message " Clear paper path." will be cleared and copying will be possible.
• When closing the side cover, press on around the handle.
• If the paper was torn, make sure that no torn pieces remain in the machine.
• If the message does not clear, check again to make sure that no pieces of paper remain.
To Next Page
