Sharp MX-M264N Installation Manual

MX-M264U Setting, Adjustments, Operation check 26 – 1
MX-M264U
Service Manual
[26] Setting, Adjustments, Operation check
1. Firmware version check and version
up
After installation of all the options to the machine, use SIM22-5 to
check the version of each firmware. If it is not the latest version,
upgrade it to the latest one.
2. Function and operation check
Check that the following operations are normal.
Check item list Equipped condition
Key-in (operation panel)
Display (operation panel)
Paper feed
operation
Hand feed
Main unit paper
tray
Desk unit paper
feed tray
With the desk unit installed
Paper size detection
Originals size
detection
Original table
mode
RSPF mode
RSPF operation /
two sided copy
S-S mode
D-S mode
S-D mode
D-D mode
Bookbinding operation When the finisher is installed
Stapling operation When the finisher is installed
Grouping operation When the finisher is installed
Sorting operation When the finisher is installed
Paper exit operation When the EXIT TRAY UNIT (MX-
TE10) is installed

Sharp MX-M264N Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	26 ppm
Max Print Resolution	600 x 600 dpi
Standard Paper Capacity	1100 sheets
Max Paper Capacity	2100 sheets
Automatic Duplexing	Yes
ADF Capacity	100 sheets
Scan Resolution	600 x 600 dpi
Copy Speed	26 cpm
Copy Resolution	600 x 600 dpi
Connectivity	Ethernet, USB